Is Your NSW Project Eligible for a CDC?
Use this NSW CDC eligibility checklist to understand the land, proposal and fire-safety checks needed before choosing complying development.
The fastest approval pathway is only useful when it is the right pathway. A complying development certificate (CDC) can combine planning and construction approval for eligible work, but the proposal must fit a prescribed set of rules. A project that misses one relevant standard does not become complying development simply because its fire design can meet the National Construction Code (NCC).
Start with two separate questions
A sound eligibility review asks:
- Is the land eligible? Check zoning, heritage and environmental constraints, bushfire and flood controls, lot conditions, road or infrastructure constraints, and exclusions in the applicable code.
- Is the proposal eligible? Confirm that the use, building type, dimensions, setbacks, floor area, height, site coverage and other development standards can all be met.
The NSW Planning Portal property information and current legislation are useful starting points. They do not replace the registered certifier’s assessment of a complete proposal.
Confirm the lawful use and proposed use
For an alteration or change of use, collect evidence of the building’s current lawful use before design begins. A marketing description such as “studio”, “warehouse office” or “short-stay accommodation” may not match the approved planning use or NCC classification.
The proposed use can change occupant numbers, hours of operation, fire load, accessibility, sanitary facilities, exits and fire-system requirements. Read our guide to change-of-use fire safety in NSW before assuming that a simple fit-out has a simple approval path.
Check building classification early
NCC classification affects the technical requirements that the certifier must consider. A building may also contain more than one classification. Mixed retail, office, storage, parking or residential areas can create different fire-resistance, egress and services requirements within the same project.
Our NSW building classes and CDC fire requirements guide explains the classes and why classification should be resolved before fire-services design.
Review fire safety before committing to the layout
A CDC is not a lower fire-safety standard. The plans and specifications must satisfy the applicable Building Code of Australia requirements. Early questions include:
- Will the proposed use change the required exits or travel paths?
- Are existing fire compartments, fire doors and penetrations documented?
- Do hydrants, sprinklers, alarms, warning systems or smoke control need alteration?
- Is the available water supply suitable for the proposed fire systems?
- Is a Deemed-to-Satisfy design possible, or is a Performance Solution being considered?
Where the fire scope is uncertain, arrange a BCA and fire-services review before the architectural design is fixed. This is usually cheaper than redesigning after lodgement.
Understand what a certifier can and cannot do
A council or appropriately registered certifier can assess and issue a CDC. The certifier applies the current rules independently; they do not redesign the proposal to make an ineligible scheme comply. The project team remains responsible for preparing coordinated and accurate information.
Read what a CDC certifier does in NSW and ask for a written document schedule before commissioning specialist reports.
A practical pre-lodgement sequence
- Obtain a current title, survey and Planning Portal property information.
- Identify the applicable planning code and every relevant development standard.
- Confirm the current lawful use and proposed NCC classification.
- Test the concept design against site and code constraints.
- Identify fire, structural, hydraulic, mechanical and electrical inputs.
- Ask the intended certifier to confirm the application pathway and document expectations.
- Coordinate all drawings to one revision before formal lodgement.
For help coordinating the fire-services component, review NEPA’s Fire CDC service or discuss your project with our team.
Common questions
Frequently asked questions
What development can be approved under a CDC in NSW?
Complying development can cover eligible residential, commercial and industrial work, demolition and some changes of use. The exact development types and standards are set by the applicable NSW planning instrument.
Can a certifier vary a CDC development standard?
A certifier determines whether the submitted proposal meets the standards currently in force. Do not assume a departure can be varied through the CDC pathway; proposals that cannot meet an applicable standard may need redesign or another approval pathway.
Does NCC compliance guarantee CDC eligibility?
No. The NCC addresses building and plumbing performance, while CDC eligibility also depends on NSW planning controls, the site and the development standards for the relevant code.
Can bushfire- or flood-affected land use a CDC?
Some affected land may qualify under additional requirements, while other land is excluded. The property constraints and the relevant code must be checked for the specific site.
Official sources
- NSW Planning — Complying development
- NSW Planning Portal — Complying Development
- Service NSW — Apply for a CDC
- NSW legislation — Codes SEPP 2008
This article provides general information for NSW projects. Planning, certification and fire-safety requirements depend on the site, building classification, proposed use, scope and applicable law. Confirm the requirements for your project with the registered certifier, council and appropriately qualified practitioners.